We Accept
Type
http://www.starsealfl.com
in box below to translate
|
Pavement Marking
Materials and Supplies
Alkyd Thermoplastic Pavement Marking Materials
Thermoplastic, is a molten material heated to 400F - 425F before it is applied to the pavement
by a Thermoplastic Handliner.
Florida State Spec.
Glass Beads are applied on top of
Thermoplastic via Dispenser.
White, Yellow, or Glass Beads – 50# Bag
|
PREFORMED THERMOPLASTIC
HOT TAPE
Asphalt Application
All Tape 90 Mils Thick
6" - White/ Yellow - 30' Roll.........12" - White - 30' Roll
Your Best Choice!
*Year-round application in temperatures as low as 32ºF (0ºC).
*No primers or adhesives necessary.
*No cracking due to material contraction or expansion.
*Impervious to vehicle oil or grease.
*High retroreflectivity.
*Environmentally safe: Contains no volatile organic compounds.
Easy Application!!
*No heavy equipment necessary.
*Minimal experience or training required to install.
*No primers or adhesives.
*Bonds to all primary substrates - asphalt, concrete and brick.
*Easily checked for bond.
*Flexible & uniform pre-beading allows for ease in installation.
|
Road Marking Delineators
White, Orange, Yellow |
Reflective Pavement Markers
Amber/Amber - Red/White - Red/Red - Blue/Blue -
Green/Green - 1 or 2-Way White |
Star-Seal of Florida Inc.
2740 N.W. 55th Court
Fort Lauderdale, Florida 33309
1-800-432-8402
(954)484-8402
Fax (954) 733-4798
 E-mail |Home | Equipment Division | Specials | About Us
|
