We Accept
Copy & paste
http://www.starsealfl.com
in box below to translate
|
Star-Supreme Asphalt Pavement Sealer
STAR-SEAL SUPREME® is a premium grade asphalt pavement sealer for those discriminating jobs that demand outstanding performance & appearance year after year.
STAR-SEAL SUPREME® has an extraordinary degree of toughness & water repellency not accomplished thus far by any competitive sealer in the industry. The hot blending of catalyzed rubber & select polymers with the refined coal tar in STAR-SEAL SUPREME® greatly enhances its toughness, flexibility at all temperatures & resistance to gasoline, oil, chemicals, & deicing salts.
The water repellency of the cured STAR-SEAL SUPREME® coating systems is the result of a very special blend of surface active agents which change the surface physical chemistry of the clays & make them hydrophobic.
Key West Airport, Key West Florida!!
OUTSTANDING FEATURES
* Longevity & flexibility of the fully cured film of STAR-SEAL SUPREME®.
* Unmatched toughness.
* Faster drying time, thus reducing the tie up time of the pavement & more efficient use of crew time.
* Uniform dark charcoal color of the finished jobs, even under not-so-friendly weather conditions.
* Ability to bridge over minor surface (non-working) cracks in the pavement.
* Resistance to re-emulsification in the presence of de-icing salts.
* Resistance to gas, oil, fat, chemicals & ultraviolet degradation from sun rays.
RECOMMENDED USES
* Industrial & commercial driveways & parking lots.
* Airfields, taxiways & shoulders.
* Service stations & truck terminals.
* Fast food restaurants & hotels.
* Play areas & home driveways.
PHYSICAL PROPERTIES & CONSTANTS
STAR-SEAL SUPREME® FED. SPEC. RP-355e
Solids, % by weight 50 Min. 47-53
Ash, % of solids by weight 36 - 38 3 - 40
Solubility of Non-volatiles in Carbon disulfide 29 - 31 20 min.
Drying Time, (hours) To touch: 1 Full set: 6-8 max.
Appearance, wet Chocolate brown semi-liquid
Color upon drying Dark slate black
STANDARDS & SPECIFICATIONS
STAR-SEAL SUPREME® exceeds the requirements of, FEDERAL SPECIFICATION RP-355e,
when tested in accordance with the following: ASTM STANDARDS.
D 2939 - Bituminous Base Emulsions for use as Protective Coatings.
D 490-77 - Standard Specification for Road Tar.
D 3320-79- Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type).
D 140 - Sampling of Bituminous Materials.
D 529 - Recommended Practice for Accelerated Weathering Test of Bituminous Materials.
D 466 - Methods of Testing Films deposited from Bituminous Emulsions.
D 1655 - Aviation Turbine Fuels.
B l17 - Salt Spray (fog) Testing.
APPLICATION
STAR-SEAL SUPREME® must be applied on structurally sound pavement by professional applicators.
Coverage rates - 0.18 to 0.20 gal/sq. yard of STAR-SEAL SUPREME®, in two coat application. Coverage rates may vary depending upon the porosity & texture of the pavement surface.
Aggregates Addition - Clean silica sand or synthetic aggregates with an average grain fineness between 50 - 70 shall be added for increased traction & textured appearance. Not recommended for steeply inclined surfaces.
Method - Mechanical or spray applicators, brush or squeegee
RECOMMENDED SYSTEMS
1st coat: STAR-SEAL SUPREME® with 4-5 Ibs. of aggregate per gallon.
Coverage rate: 0. 10 - 0. 12 gall*/square yard.
2nd coat: Composition same as for 1st coat.
Coverage rate: 0.09 - 0.11 gall/square yard.
CURING TIME
Will vary according to temperature & relative humidity at the time of application.
Under ideal drying conditions (80 deg. F & 50% relative humidity allow at least;)
*8-12 Hours between successive coats.
* 24 hours after the application of the last coat prior to opening to traffic.
WEATHER LIMITATIONS
Surface & air temperature should be a min. 50 degrees F. & rising.
Do not apply on rainy, foggy, & extremely humid days, or when rain is in the forecast within 24 hours.
Dampen the pavement with a fine mist of water if the pavement temperature is over 100 degrees F., to facilitate even spreading.
Do not allow the water to puddle on the surface.
SEALCOATING FOR AIRPORT PROJECTS
SPECIFICATION: FAA P-627
 
Homestead Air Force Base
Homestead, Florida
STAR AVIATOR
• Far superior in performance than conventional mix designs where rubber is mixed on the job.
• Meets and/ or exceeds FAA performance tests & Specs.
• STAR AVIATOR contains FAA required rubber.
• No on the job blending of rubber latex & excessive amounts of water.
• Minimal time needed for sealer preparation.
• No on-the-job inspection (for rubber amounts) is needed.
• Pre-shipment certification for FAA performance tests issued by STAR.
GENERAL DESCRIPTION
STAR AVIATOR is an outstanding sealer that is Dramatically Superior to the
conventional FAA mix design sealers.
STAR AVIATOR as supplied already contains the rubber per FAA specifications.
The rubber is hot blended during the manufacturing process.
The superiority in performance has been established in field performance.
Star-Seal Asphalt Pavement Sealer
Greatly Extends the Life of Your Asphalt Pavement...
Star-Seal Asphalt Pavement Sealer's primary purpose is to PROTECT your Asphalt.
Star-Seal Asphalt Pavement Sealer resists gas, oils, salt & chemical penetrations; prevents the seepage of moisture from snow & rain; stops oxidation from actinic rays in sunlight.
Drying to a Dark, Charcoal Black color, Star-Seal Asphalt Pavement Sealer not only Beautifies & keeps pavements looking like new, but it Enhances your Business Image & Property Values as well.
How Well Does Star-Seal Perform?...The cured films of sealcoatings frequently encounter rain, snow & sleet.
It is extremely important that these films retain their performance properties under such conditions & not be prematurely eroded by traffic. The scrub resistance test has consistently proven Star-Seal to have excellent durability under water.
 |
This test simulates the expected performance of a sealcoating
over a period of time. The sealer samples are cast in 30 mils wet film thickness on a white mylar panel & allowed to cure for 7 days.
After the cure, the samples are submerged in water containing
silica sand & scrubbed with a brass bristled brush.
|
Does Star-Seal Meet the ASTM Standards?...Yes...Star-Seal Asphalt Pavement Sealer is a Heavy-Duty Refined Coal-Tar Sealer specifically designed to
Protect asphalt parking lots & driveways.
Manufactured to meet (ASTM) D 5727-00 Standards, which replaces Federal Specification RP-355-e & (ASTM) D 5727-95.
Please Click Here for Material Safety Data Sheet on Star-Seal Asphalt Pavement Sealer
A dilution rate with water of 25-40% is suggested depending on the quality of the asphalt surface, as well as the type of traffic it will experience. Aggregates should always be considered in the mix design for application.
Star-Seal carries a variety of additives needed for the Sealer Mix.
We take pride in our Customer Service.
If you have any Questions, please give us a call at:
1-800-432-8402 or
(954)484-8402
Star-Seal of Florida Inc.
2740 N.W. 55th Court
Fort Lauderdale, Florida 33309
 E-mail |Home | Equipment Division | Specials | About Us
|